Shell
drilling rig runs aground in heavy Alaska seas
1
January, 2013
Days
of efforts trying to guide a mobile offshore drilling rig through
stormy Alaska seas hit a crisis Monday night when crew members were
forced to disconnect the rig from its last remaining tow line and the
vessel went aground on a small island south of Kodiak.
“The
first priority was the safety of the people,” said Darci Sinclair,
spokeswoman for the unified command of U.S. Coast Guard, Shell Alaska
and drill ship owners who had been trying mightily to avoid just such
an eventuality ever since the Kulluk rig first ran into trouble
Thursday night.
The
266-foot conical drill barge first broke free of its lines last week
while being towed back to port in Seattle after a summer season of
drilling off the coast of Arctic Alaska. Troubles mounted when the
tow vessel, the Aiviq, lost all four of its engines due to possible
fuel contamination, and the drill rig was briefly adrift.
Over
the weekend, the Aiviq’s engines were repaired and a second vessel
was able to join it in towing the Kulluk toward safety in Kodiak. All
17 crew members on the Kulluk, which does not have its own propulsion
system, were evacuated. But though the Kulluk was attached to two
different towing vessels by Monday afternoon, high seas and strong
winds continued to pose problems.
A
line to the first tow vessel was separated at about 4:40 p.m. Then,
with winds gusting to nearly 70 mph and swells of up to 40 feet,
incident commanders were forced to disengage the last remaining line
connecting the Kulluk to the second tow vessel, the Alert, in order
to protect the Alert's nine-member crew.
The
rig was about four miles away from land at that point, incident
commanders estimated.
“Once
that final tow line was released, about 45 minutes later, it ran
aground,” Sinclair told the Los Angeles Times.
The
Kulluk struck the southeast side of Sitkalidak Island, which Sinclair
said appears to be largely uninhabited.
The
main concern now is potential for leakage from up to 150,000 gallons
of ultra-low sulfur diesel on board the Kulluk and about 12,000
gallons of combined lube oil and hydraulic fluid also on board.
“We
don’t have any reports yet of discharge. The Coast Guard has done a
flyover, and once we have daylight and weather conditions permit,
we’ll do a further assessment,” Sinclair said.
She
said the drilling rig stores fuel for generators and other uses in
the center of the vessel, encased in heavy steel.
Environmental
groups which have been battling the opening of U.S. Arctic waters to
offshore oil drilling quickly warned that the crippled drill rig is
an example of the problems that can occur in the harsh weather
conditions of the far north.
“Shell’s
Arctic drilling season has been plagued with problems, missteps, and
near disasters. We are fortunate that this latest incident happened
close to the Coast Guard station in Kodiak. Response equipment was
nearby,” the conservation group Oceana said in a statement. “If
this had happened in the Arctic Ocean, Shell could have been on its
own, 1,000 miles from the help it needed. The rough conditions that
prevented a rescue today could be compounded by darkness and ice in
the Arctic.”
Lois
N. Epstein, Arctic program director for the Wilderness Society, said
the incident suggests Shell’s equpment is “no match” for the
Alaskan winter seas.
“Shell’s
costly drilling experiment in the Arctic Ocean needs to be stopped by
the federal government or by Shell itself given the unacceptably high
risks it poses to both humans and the environment,” she said in a
statement.
No comments:
Post a Comment
Note: only a member of this blog may post a comment.