Wednesday, 16 February 2022

Stunning New Images Of Complex 'Nanotech' Devices Found In NZ Pfizer 'Comirnaty' Vials


 

Life in the Blood,

For those who just want the short story: Here’s the picture of one drop of New Zealand’s Pfizer COMIRNATY “vaccine” under a cover slip, after it was inadvertently heated lightly, and viewed later the same day through dark field microscopy at low magnification, and projected onto a TV monitor.

The images below are from a new sample, after a new computer with top notch graphic capacity was purchased. These images came through software connected to a microscope camera.

 

Increase the magnification on the images below and look closely.

The long story goes like this: 

I have a background in medicine, mathematics and physics, with extensive phase contrast microscopy experience. 

People who were injured by the Pfizer jab wanted help. At this time in 2021, I didn’t have a microscope.  

Several doctors had come forward in other countries to report strange observations. Dr. Zandre Botha from South Africa showed the uniform strange round circles. La Quinta Columna showed what appeared to be microchips and other formations. Two other doctors talked about parasites and of all things, hydras!  

This is not my first rodeo. Having previously experienced how those of us that critically look at the vaccine situation are heavily infiltrated by persons wishing to divert and control the narrative,  I thought, “What is real?”, “What is put forth in order to lead questioners to look like fools?” 

Because of my previous extensive microscopy experience, learning to use a dark field microscope didn’t take a huge amount of education. I took a 12 week course on live blood analysis using the most sophisticated dark field microscope and camera, that my money could buy. It magnifies up to 4000x.  

After having a close look at the blood of dozens of vaccine injured people, patients started asking me about certain round and square bright yellow formations in their capillary blood as seen on the screen.

Nothing in the textbooks identified such things, and various people doing similar work, suggested that they might be crystals or some sort of slide or cover slip anomaly.  At first, I just told the patients that it wasn’t important—possibly uric acid or something like that.  

Then several “empty” vials of Pfizer COMIRNATY vaccine were obtained. I trust the source of the shots 100%. The vials were from recent leftover vaccine after the shots had been given. 

On a Friday in December, alone in my office, I took the vials out, thawed, and examined them. I drew up all the contents (just a few drops in each one) from each vial into a 3cc syringe with a 16G needle and put one drop of it on a slide with a cover slip, and another slide with a drop of vaccine mixed with a drop of human blood and put a cover slip on it.  

The images that follow are from the different slides and were taken immediately after the slides were made.

The amount of activity in the liquid and the strange shapes were baffling to say the least.

Squares and circles seemed to connect up to each other consistently. Over an hour or two, the squares and circles seemed to enlarge somehow.

On the same hot day, I had to travel from my office to another office some distance away. The slides were packed up in plastic slide mailers and placed in a cardboard box in the car alongside the microscope. It had been a long week, and the ocean looked enticing, so I parked the car with the windows cracked about two inches, went for a 40-minute walk, then continued my drive.  

At my destination, the microscope was set up and I had another look at the slides. I don’t scare easily but what I saw next gave me a bit of a chill.

Then an enormous formation appeared right under my nose and I grabbed some pictures. At this point, my software was not matching up well with my mac computer so the phone video was the only option.

The straight lines and corners were lined with squares, rectangles, and circles.

Wanting better graphics, I purchased a PC laptop with the best graphics the store could offer me. The software was then useable and I could take future images from the video program attached to the camera, for better definition.  

If this was to be believed by anyone, it had to be repeated and understood better.  

In the days that followed I contemplated how the formation happened. Was it a function of time? Of the vibration in the car? Heat? Cell towers along the way? It could have been any of those, so I took some more of the liquid and plated out some more slides, put them in multiple slide carriers, drove them all around the city near cell towers for two hours, and then came back.  

I did get some additional interesting images but nothing like the first one.

A few weeks later, I got hold of some more vaccine from the same source. This time there were lot numbers and four vials. I plated them out separately and also mixed some of the old liquid with the new. The new liquid had far more circles than the first lot, and had fewer squares.

The first attempts gave formations.

 

 

Interesting that on the second day when I came back and re-looked, the structures had shifted off their foundations. This may have been from handling the slides but it shows that the formations are “things” and not shadows or dehydration. 

After some more attempts, interesting activity and organization occurred, but no dramatic new images were made.  I plated out another batch on the 16th of January. Then I took them out in the car into the city on a hot day and left them in the car with the windows down. It was around 28°C outdoors, and the car got to around 40°C max. When I got home, this image was on the slide with a whole lot more. The experiment was successfully repeated.

 

The organisation that occurred does not appear to be simply organic, or debris, or artefact, and it is not simply dehydration of the slide.  

It seems highly self-organised by design.  

The following images are from the slide which had one drop of fresh human blood mixed with one drop of vaccine liquid. When the liquid met up to the blood, the white blood cells were annihilated, and the red blood cells heavily damaged. 

While concentrating on getting as good a focus as possible, I didn’t think too much of what I captured. But when I later looked closer, it was obviously an image of some sort of nano-tech chips linked by “cords”. The cords may be made in part from fibrin. But what is certain is that when mixed with human blood, different things than just “vaccine alone”, happen on the slide.  

Have a look.

There were also these startling formations:

For so many months I had pondered how this infection could be so severe, that the vaccine has to be given to every human on the planet several times—even if one has recovered from Covid. This is unprecedented in vaccine history.  

Why aren’t more people looking at the vaccine under a microscope? Why hasn’t the public been informed of the full ingredients of the only FDA approved vaccine for Covid?  

The pictures speak for themselves.  I am making no claims as to what we are looking at. I have noticed on line that some people who read the original publications, have made claims on my behalf.

All I have done is look at different aspects of the vaccine and the blood under microscopy. 

This research should be continued by other laboratories with high powered microscopes.  

It would require quality slides and cover slips. Place a drop of vaccine from a used vial or a fresh vial onto the slide and cover it.  Observe the activity at lower magnification and also at 1600 to 4000x using dark field microscopy. Get a dry incubator for the fresh slides and set it at different temperatures ranging from 38-42 for at least an hour. Observe again. If nothing interesting occurred, try putting it back in the incubator. Follow up the second day. Do the same with a drop of blood and a drop of vaccine. Combine different vaccine lots and use one drop of the combined vaccines on each slide.  

Wear gloves, use PPE, and vent the space so you are not breathing any vapour off the liquid (a laminar flow hood would be ideal).  

No comments:

Post a Comment

Note: only a member of this blog may post a comment.