Pages

Saturday, 30 January 2016

Japan restarts nulear reactor using plutonium

Japan Restarts Nuclear Reactor Using Plutonium-Mixed Fuel


29 January, 2016
Japan on Friday restarted a nuclear reactor that uses riskier plutonium-based MOX fuel, the first of that type to resume operations under stricter safety rules introduced after the 2011 Fukushima disaster.

Japan's large stockpile of plutonium has raised international nuclear security concerns, and the government has come up with the idea of burning it in reactors to reduce the amount.

The No. 3 reactor at Takahama nuclear plant in western Japan, operated by Kansai Electric Power Co., went back online Friday. Dozens of people protested outside the plant in Fukui prefecture, where preparations for a restart of another reactor, No. 4, are also underway.

Fukui has more than a dozen reactors, the biggest concentration in one prefecture, causing safety concerns for neighbors including Kyoto and Shiga, whose Lake Biwa is a major source of drinking water for western Japan.

Two reactors that use conventional uranium fuel were restarted last year in southern Japan.

Japan started burning MOX, a plutonium-uranium hybrid fuel, in some of its conventional reactors in 2009. Experts say conventional reactors can safely burn MOX for up to one-third of their fuel, but it emits more radiation and could interfere with control rods when they are needed to suppress the nuclear chain reaction.

Japan has enough plutonium, mostly from reprocessed spent fuel, to make 6,000 bombs.

Nearly five years since a massive earthquake and tsunami caused meltdowns at the Fukushima Dai-ichi nuclear plant, about 100,000 people still cannot return to nearby areas. Workers at the plant continue to struggle with its decommissioning, which will take decades.


Aiming to help business by generating energy, Japan's government is pushing to restart as many reactors as possible after they are deemed safe. Forty remaining workable reactors are still offline for safety checks.

No comments:

Post a Comment

Note: only a member of this blog may post a comment.